Compact Chlorine Dioxide Generator 30-200 G/H Manual Control

Compact chlorine dioxide (ClO2) generator is a small capacity & compact clo2 generation & dosing system on-site for disinfection, de-algae, descaling, bleaching, and deodorization, etc.. It can pressured dosing clo2 solution directly into the pressured water with simple, safe, reliable, stable operation and other characteristics.

More functions are optional, manual / pumpl linkage, flow rate auto-control, residual clo2 auto-control. It is specifically designed for small-scale water plant, swiming pool, deep well water supply and secondary water supply. The customers can install and debug disinfection system by their own in accordance with instruction provided by the manufacturer.

It has many unique and prominent features of optimized structural design, good materials choice, good quality, low cost, safe and reliable operation and good applicability.

We always provide the most economical, reasonable and suitable disinfection solutions to our customers according to their special requirements and special circumstances of the scene.

Place of Origin: Jiangsu, China (Mainland)
Model: CPF-30CX, CPF-50CX, CPF-100CX, CPF-200CX, option
Capacity: 30 / 50 / 100 / 200 grams per hour
Certification: ISO9001, CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual Control
Installation Method: Wall-mounted or vertical
Power Supply: 220V/50Hz

Working temperature: 5 ~ 40 degrees Celsius

Operating voltage: 220V plus or minus 10%
Operating current: < 2A
There should be no strong electric field and magnetic field interference around equipment.
Maximum pressure of water-pipe-line: < 0.7Mpa
Available ClO2: 0~200 grams/hour, setting as needed
Functions option: manual / pump linkage, flow rate auto-control, residual clo2 auto-conrol
Volume of sterilizing water: 100~200 tons/hour, depends on the water quality

Producing process:
5NaClO2+4HCl = 4ClO2+5NaCl+2H2O

Raw chemcials:
Use of raw materials:
Sodium Chlorite solution: 18.5% Sodium Chlorite solution
Hydrochloric Acid: 15% HCl
More ratios are available.

Working principle:
Use sodium chlorite and hydrochloric acid as raw materials, transmission in proportion of raw materials through two metering pumps to the reactor, produce quantitative, the concentration of more than 95% of high-purity chlorine dioxide solution added to water for disinfection. Raw materials conversion rate is more than 95%.