Disinfection Machine
Chemical Treatment
Industrial
Plywood Box
5000 gram per hour
Waterman
CPF-5000S
Made in China
8419200000
3, 000 PCS/Year
Available | Customized Request
Chlorine Dioxide is safe and ideal for water treatment.
Waterman brand underwater immersion chemical chlorine dioxide generator
is specially customized for places with high safety requirements such as oil fields.
The reactor is submerged in a pool or water tank.
Raw chemicals: sodium chlorite and hydrochloric acid, or three precursors, option
Place of Origin: Jiangsu, China (Mainland)
Model: CPF-5000S
Capacity: 5000 gram per hour
Reactor: Titanium alloy, underwater immersion
Certification: ISO9001:2015
EINECS No. 233-162-8
CAS NO. 10049-04-4
Power Supply: 380V/50Hz
Installation Method: Wall-mounted or vertical
Package: Plywood box
Shell life: 8 years
Main parameters:
1. Operating voltage: AC380V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage Residual ClO2 auto-control (option)
Flow auto-control (option) Low liquid level alarm function
Timing start / stop function
Alarm remote transfer
Chemical Equation & Raw Material:
5 NaClO2 + 4HCl = 4ClO2 + 5NaCl + 2H2O
NaClO2: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO2 and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2 solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.
The highest outlet pressure of ClO2 solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO2 can be adjusted manually or automatically by receiving 4-20mA signal sent by Flow rate sensor or Residual ClO2 sensor.
Chlorine Dioxide is safe and ideal for water treatment.
Waterman brand underwater immersion chemical chlorine dioxide generator
is specially customized for places with high safety requirements such as oil fields.
The reactor is submerged in a pool or water tank.
Raw chemicals: sodium chlorite and hydrochloric acid, or three precursors, option
Place of Origin: Jiangsu, China (Mainland)
Model: CPF-5000S
Capacity: 5000 gram per hour
Reactor: Titanium alloy, underwater immersion
Certification: ISO9001:2015
EINECS No. 233-162-8
CAS NO. 10049-04-4
Power Supply: 380V/50Hz
Installation Method: Wall-mounted or vertical
Package: Plywood box
Shell life: 8 years
Main parameters:
1. Operating voltage: AC380V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage Residual ClO2 auto-control (option)
Flow auto-control (option) Low liquid level alarm function
Timing start / stop function
Alarm remote transfer
Chemical Equation & Raw Material:
5 NaClO2 + 4HCl = 4ClO2 + 5NaCl + 2H2O
NaClO2: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO2 and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2 solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.
The highest outlet pressure of ClO2 solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO2 can be adjusted manually or automatically by receiving 4-20mA signal sent by Flow rate sensor or Residual ClO2 sensor.
